 |
All instruments and tools conform to
both the USP and EP standards |
 |
Positional check with error display for
each paddle (tool) position |
 |
Positional check with error display for
the water bath position |
 |
Traffic Light status indication system
for first line failure indication |
 |
Water flow check monitor for water flow
through heating system with error display |
 |
Auto shutdown of heating system if water
flow fails |
 |
Water diffuser in water both ensures
even dispersion for heated water return |
 |
Water bath is decoupled from the pump
and heater system to ensure vibration-free operation |
 |
Precise electronic coniral of both
(tool) stirrer speed and water bath temperature exceeds requirements
stipulated in the Pharmacopoeias |
 |
Independent tool chuck system available
in each working position to allow staggered starts for individual
dissolution test vessels. As each tool is electronically monitored
for correct position in the chuck, the correct tool depth for each
position is always ensured |
 |
Stirrer speed is adjustable from 25 to
250 rpm with a typical accuracy of <2% |
 |
Bath and medium temperature adjustable
between 25 and 450 C with a typical accuracy of <0.2 OC over the
whole bath |
 |
Easy access to all vessels as the head
moves up by approximately 20cm |
 |
Attach a pump and a PTFC2 fraction
collector with an EPE to achieve off line automation. |
 |
The sampling times are controlled by the
PTWS 300 series dissolution tester |
 |
Upgrade the EPE to include an ITM
(Individual Temperature Measurement option) at any time |
 |
Progmmmable acoustic signal for manual
sampling alert |
 |
Standby mode allows power saving for
overnight auto shut down and early morning power up |
 |
Auto centring feature for each vessel in
the water bath cover |
 |
Communication port for connection of
either a data logger or for automated external bath control for on
line systems |
 |
Integrated printer output far printing
of OQ and run-time protocols |
 |
Auto shut down of the flow through
heater, electronic monitoring of pump flow |
 |
Error display on "traffic
light" display |
 |
Integrated program for adjustment of
stirrer speed, temperature and pH measurement |
 |
Large range of tools available:
stainless steel paddles, baskets, trans-dermal patches, paddle over
disk tools, cream cells and brown (UV protective) USP vessels |
 |
Stainless steel instrument housing (head
section is also powder coated lacquer treated) |
 |
IQ and OQ documentation delivered with
each instrument type |