|
|
|
|
B04- Pressure Blowing Concentrator
|
SC-2800D |
SC-2800W |
Descriptions
This equipment is designed to apply to preparative samples
in chromatography, or mass spectrographic analysis. It adopts the
international approval method to proceed with sample concentration by
introduction of nitrogen to heat up the surface. This pressure blowing
concentrator has benefits of time-saving, easy-control, and user-friendly,
and it can soon achieve anticipated results. It enables rapid samples of
separation and purification by applying solid phase extraction (SPE) process
to replace conventional liquid extraction and chromatography procedures.
Features
-
Gas is ducted above the solution surface in a vial through
a switching valve and a needle.
-
SC-2800W Water bath rack can be placed in the tank or out
of the tank, and the rack can be fixed at any height of the crutch.
-
SC-2800D Dry bath uses aluminum block as conducting
interface for quick heating and temperature control.
-
Heating blocks of variable holes and accompanied needles
are available. Tubes are separately placed on the rack without causing
cross contamination.
-
Special design of water container to prevent the inner
elements from damage of leaking liquid.
-
Thicker aluminum heating block can provide more even and
precise temperature. Actual temperature is measured by the built-in
temperature sensor.
-
Two sets of dual 4-digit display to separately show
set/actual temperature and set/operating time.
-
Automatic temperature protection alarm guarantees safe and
reliable operation.
Specifications
|
Model |
SC-2800W Water Bath |
SC-2800D Dry Bath |
|
Heating Samples |
12, 24, 40 tubes |
|
Temperature Range |
Room temperature + 5ºC ~ 180ºC |
|
Max Temperature Protection |
185ºC |
|
Max Temperature |
Set temperature + 5 ºC |
|
Temperature Accuracy |
±0.1ºC |
|
Time Set |
10min~99hr 59min |
|
Power Consumption |
350W |
|
Holes of Heating Block (SC-2800D) |
Standard size 6/12/20 holes Double size 12/24/40 holes
|
|
Dimensions of Heating Block (SC-2800D) |
2 Standard size: 95mm × 70mm × 75mm (W × H × L) 1
Double size: 150mm × 70mm × 95mm (W × H × L) |
|
External Dimensions (W × D × H) |
240mm × 130mm × 215mm (rack height is not included)
|
SC-2810D Series (Larger opening size)
|
Model |
SC-2810D-8 (8 tubes) |
SC-2810-D-12 (12 tubes) |
|
Temperature Range |
Room temperature + 5ºC ~ 300ºC |
|
Max Temperature Protection |
385ºC |
|
Max Temperature |
Set temperature + 5ºC |
|
Temperature Accuracy |
±0.1ºC |
|
Operating Temperature |
5ºC ~ 35ºC |
|
Time Set |
10min ~ 99hr 59min |
|
Power Consumption |
1350W |
|
Holes of Heating Block |
8/12 holes |
|
Dimensions of Heating Block |
210mm × 95mm × 150mm (W × L × D) |
|
External Dimensions (W × D × H) |
268mm × 230mm × 165mm (rack height is not included)
|
|
|
